Magnetic Overband Separator Field Application
There are two types of hanging installation methods, inclined and horizontal, both of which are related to the iron separator working at the relevant position of the conveyor belt.
Horizontal Installation
This Electromagnetic Overband Separator is suspended on the assembly line with a wire rope, and the height between the track and the conveyor belt can be adjusted by adjusting the wire rope on the hanging lug.
Magnetic Materials Separated by Overband Magnetic Separator
RUIJIE Belt suspended magnet is a kind of electromagnetic equipment used to remove iron parts from non-magnetic materials.Suspended Permanent Magnet is composed of magnetic system, shell and other parts, and is an environmentally friendly, high-efficiency and energy-saving iron removal equipment.
The following are the magnetic materials of large and small iron blocks separated from the customer’s incineration bottom ash separation plant and household appliance waste waste, and construction waste recycling plant through RUIJIE Suspended Overband Magnetic Separator.
Our Magnetic Overband Separators can work continuously without failure in harsh environments, with low failure rate, large magnetic permeability depth and strong suction.
Iron is Removed From Incineration Bottom Ash (IBA)
In the video, our machine is applied to the ash selection line of the incineration bottom, which is continuous and automatic in the process of iron removal, and no care is required after the equipment is started.In addition, the magnetic force size can be controlled by the control cabinet, the control cabinet of the machine is made of 304 stainless steel, in a humid environment, anti-corrosion, anti-rust, easy to clean and not easy to accumulate dirt.
The surface of our machine rotating belt is designed with a unique armored belt, which can effectively prevent the cutting of the belt by sharp and sharp ferromagnetic substances during the working process, and become more stable and durable during operation, with higher sorting efficiency and longer service life
Precautions Are Required During The Working Process of the Electromagnetic Overband Separator
1.Before The Work Of The Electromagnetic Iron Remover: all aspects of the iron remover should be inspected to see whether the screws are loose, whether the belt is broken, and whether the wire is aged and damaged when using the electromagnetic iron remover.
2.During The Working Period Of The Machine: you should always check whether the electronic control index is normal, whether the excitation effect of the electromagnetic iron remover is good, as well as air humidity, air temperature, equipment temperature, etc., which are important factors that affect the normal excitation of the iron remover
3.After Stopping:under normal circumstances, after the excitation of the permanent magnet iron remover is completed, the ferromagnetic impurities should be stopped immediately, and the electromagnetic iron remover should be powered off immediately to remove the impurities.
What Are The Common Faults Of Electromagnetic Overband Separator ？
|
Common Fault |
Reason Analysis |
Elimination Methods |
|
The belt is loose |
The belt is used for a long time, and the tension force becomes longer |
Loosen the fixing screws of the four bearing seats of the two idlers, and twist the adjusting screws of the idlers so that the idlers are pushed outwards. When the belt is tensioned, tighten the fixing screw of the roller |
